Knowledge Base Articles
Browse Results: ZoneFlex Indoor > Known Issues and Workarounds
-
PoE injector powers AP but does not pass data
AP powers up but does not pass traffic when using 10/100 mid-span injector -
PoE Interoperability Notice for ZF7982
Ruckus Wireless is aware that when multiple ZoneFlex 7982 AP?s are connected to certain PoE switches, some AP?s fail to power up. Ruckus has investigated the issue in depth and believes this not to be a ZoneFlex7982 product problem, but rather a common design flaw found among several models of... -
Mesh Compatibilty between different model APs
This article explains what are the prerequisites to establish Mesh between different model APs -
Administrative Log-in wont take default or known good username and password.
Ruckus is aware of an issue that has been identified where the administrative log into a Ruckus unit doesn?t accept a known good userid and password or a Factory defaulted userid and password . -
Cisco PTT 79xx VoWLAN Configuration
Specific configuration parameters for Cisco 79xx VoWLAN phones -
What information I need to provide when contacting Ruckus Wireless technical support when there is an issue?
-
"set interface" CLI command executed on AP gets erased after AP reboot
cli command "rkscli>set interface eth0 type access untag <vlan id>" is erased after AP reboot -
Android tablets/phones with SWAT disconnects from a closed wifi network
Android tablets/phones with SWAT disconnects from a closed wifi network -
Static IP address of AP is not Static through GUI
7055 static IP address is not staying static after configuring through GUI. -
New Antenna Patterns for Ruckus Planner 7982, 7321 7055, 7372, 7782, 8800