Knowledge Base Articles
Browse Results: ZoneFlex Indoor > Troubleshooting
-
Unable to connect more clients when using WEP or WPA with TKIP algorithm
Unable to connect more clients when using WEP or WPA with TKIP algorithm -
Shows the Error message as "no wlan is configured for guest"
Shows the Error message as "no wlan is configured for guest" -
Computer running VM (such as a VMWare Virtual Machine), Unable to get a DHCP IP address.
Problem where a Computer running VM (Virtual Machine) is unable to get a DHCP IP address. -
PoE injector powers AP but does not pass data
AP powers up but does not pass traffic when using 10/100 mid-span injector -
Traffic statistics in standalone AP
This is an introductory article to help find and review general traffic statistics extracted from WebUI to verify performance. for AP 7363 -
Description of signal strength displayed and measured by the Ruckus Zone Flex system
-
Mesh Compatibilty between different model APs
This article explains what are the prerequisites to establish Mesh between different model APs -
Is it possible to enable/disable 802.11d for specific wlan in stand alone AP?
-
Troubleshooting Zone Director and Access Point Connectivity Issues
These are preliminary troubleshooting steps for customers with ZD to AP connectivity issues. The last step is to save the support info on the Zone Director before contacting technical support at Ruckus Wireless. -
Change the Ipaddress of ZD's when smart redundancy is enabled