Knowledge Base Articles
Browse Results: SmartCell Gateway
-
Do the Zone Director 5000 and SCG 200 Chassis use same mounting bracket?
-
Fail to create report with radio option in SCG
In SCG release 2.1.0, when trying to create TX/RX bytes report for management domain in 2.4G radio, the system returned with following message: "Unable to update the report. Reason: String index out of range:-1" -
How do you change the enable password on SCG?
*Want to change the enable password -
How to set up a different management VLAN on AP
Steps to configure Access Point with local VLAN other than the ZD/SCG/vSCG/SZ100 management VLAN -
How to check whether the AP is SCG compatible or not
How to check whether the AP is SCG compatible or not -
Patch script for vulnerabilities CVE-2014-7186, CVE-2014-7187, CVE-2014-6271 and CVE-2014-7169
All SmartCell Gateway (SCG) and Virtual SmartCell Gateway (vSCG) controller versions are impacted by the following vulnerabilities: - CVE-2014-7186 - CVE-2014-7187 - CVE-2014-6271 - CVE-2014-7169 The attached KSP file has been released to address these vulnerabilities and is applicable to... -
vSCG ap initially connects but immediately disconnects and remains disconnected
-
vSCG Guestpass page customization
Customizing the vSCG guest pass page. -
Setting up DHCP server on a Ubuntu Linux machine to provide option43 to Ruckus APs
This article walks you through installation of DHCP server and configuring it to provide option43 setting to Ruckus APs. Once the APs retrieve a DHCP IP with option43 string they will discover ZD or SCG for management.